New
1 / 6
3 Tier Over Sink Dish Drying Rack Large Capacity with Cover
$3.95–$5.50
FOB
Brand: YuCron
Unit price quoted per project (size, LED option, quantity, destination). Send an inquiry for the exact factory price.
Model
YC-SR-IPJL
Certified
MOQ
100
Lead time
15–25 days
Size
Our service advantages
Factory-direct pricing — no trading margin
Reply within 4 working hours, in English
CE · RoHS · ETL certified products
Our advantages — supplier customization
OEM & ODM service
Up to 50 colour & size combinations
Custom sizes available
DETAIL
What does this model look like in detail?
3 Tier Over The Sink Dish Drainer Drying Rack Large Capacity Kitchen Organizer With Cover
A three-tier over-the-sink dish drainer drying rack is a boltless cold-rolled steel storage organizer that holds up to 50kg per tier while sitting above a kitchen sink or counter. The unit uses 0.8mm SPCC steel with a 60–80μm powder-coated finish, assembles in under 8 minutes without fasteners, and ships in an ISTA-3A honeycomb export carton for bulk buyers.
Factory-direct pricingOEM & ODM serviceReply within 4 working hours
Heavy-Duty Shelving Specification Overview
The rack is built on 0.8mm cold-rolled SPCC steel with a 50kg static load rating per tier, making it a heavy-duty dish drying shelf rather than a wire-frame accessory. Three tiers stack vertically above the sink zone, and the open-frame geometry lets air circulate around wet dishware while keeping the counter clear. Upright sections and Z-beams are cut on the same line, so tier spacing stays consistent across production runs and replacement parts fit without rework. Buyers specifying this unit should confirm sink width and counter depth before ordering, because the over-sink footprint determines whether the leveling feet rest on tile or on the counter edge.
Anti-Corrosion Surface Treatment & Metallurgy
- Cold-rolled SPCC steel substrate selected for flatness and consistent coating adhesion across large shelf panels
- Full-immersion powder coating cured at 180°C forms a 60–80μm film that resists kitchen humidity and food splatter
- 48-hour neutral salt-spray testing screens each batch before packing, catching adhesion failures early
- Edge and weld seams receive the same coating pass, closing the rust initiation points typical of dipped finishes
Reinforced Center-Support & Upright Stability
- Center support beam under each tier limits mid-span deflection when dishware weight concentrates in the middle
- Boltless Z-beam locking joins uprights and beams with a mallet tap, removing fastener loosening over time
- Adjustable leveling feet absorb 0–15mm floor variance so the frame sits square on uneven tile
- Upright wall thickness and beam geometry are matched so lateral sway stays controlled under loaded tiers
Commercial Garage & Logistics Scenarios
The three-tier over-sink dish drainer works as a compact static storage rack in commercial dish return stations, garage utility zones and small stockrooms where floor space is fixed. In restaurant back-of-house use, the 50kg per-tier rating covers stacked plates, pans and prep containers without mid-shift sag, and the powder-coated surface wipes clean of grease and food residue. Garage buyers use the same frame for bottled goods, tools and pantry overflow because the open shelf geometry accepts irregular shapes that closed cabinets reject. For logistics buyers, the boltless design means units can be flat-packed, shipped in volume and assembled on site by staff with a mallet rather than a maintenance technician.
Custom Dimensions & Bulk SKU Programs
- Widths from 600mm to 1200mm and two- or three-tier builds available at MOQ 50 units
- Logo printing and retail carton artwork produced in-house under OEM/ODM terms
- Powder-coat color matching against buyer-supplied samples before mass production
- Spec sheets and test reports issued per SKU so buyers can list the rack with verified load data
Factory QC & Container Load Optimization
- ISTA-3A honeycomb export cartons protect coated panels through multi-leg freight handling
- Load plans sized per order to raise units per container and cut freight cost per rack
- BSCI/SGS-audited facility with 20,000 m² plant and 500,000 pcs annual capacity behind bulk orders
- Lead time 15–25 days after spec confirmation and deposit, with English quotations in 4 working hours
At a Glance
Key Highlights
- 50kg static load per tier, tested on cold-rolled SPCC steel uprights
- 60–80μm powder coat passes 48-hour neutral salt-spray check
- Boltless Z-beam assembly completes in under 8 minutes, mallet only
- Leveling feet absorb 0–15mm floor variance under over-sink placement
- Custom width 600–1200mm and 2 or 3 tiers at MOQ 50 units
- ISTA-3A honeycomb carton protects every export shipment
Typical Applications
Over-sink dishware drying in residential kitchensCommercial restaurant dish return and air-dry stationsGarage and utility room pantry overflow shelvingSmall retail stockroom back-of-house organizationApartment kitchen counter space expansionCatering prep area utensil and pan storage
Core Selling Points
- Cold-rolled SPCC steel frame with 0.8mm wall thickness carries a static load rating of 50kg per tier, letting buyers stock dense dishware or pantry goods without shelf sag under sustained daily use.
- Full-immersion powder coating applied at 180°C cure forms a 60–80μm anti-rust film that survives humid kitchen air, verified by 48-hour neutral salt-spray testing before any batch leaves the line.
- Boltless Z-beam locking assembles a complete three-tier unit in under 8 minutes with a single mallet, cutting buyer installation labor and eliminating loose fastener losses during transit.
- Adjustable leveling feet compensate for 0–15mm floor variance, keeping over-sink racks level on uneven tile and preventing wobble that stresses welded joints over time.
- Custom widths from 600mm to 1200mm and tier counts of two or three are available at MOQ 50 units, with logo printing and retail carton artwork handled in-house under OEM/ODM terms.
- Test reports for load and coating performance are available on request, and every shipment ships against an ISTA-3A honeycomb export carton to reduce freight damage claims.
- Quotations return within 4 working hours in English, and production lead time runs 15–25 days after spec confirmation and deposit for standard powder-coat colors.
Product Showcase
Cold-rolled SPCC steel frame with 0.8mm wall thickness carries a static load rating of 50kg per tier, letting buyers stock dense dishware or pantry goods without shelf sag under sustained daily use.
Key Design Details
Full-immersion powder coating applied at 180°C cure forms a 60–80μm anti-rust film that survives humid kitchen air, verified by 48-hour neutral salt-spray testing before any batch leaves the line.
Built for Your Projects
Boltless Z-beam locking assembles a complete three-tier unit in under 8 minutes with a single mallet, cutting buyer installation labor and eliminating loose fastener losses during transit.
Typical Applications
- Over-sink dishware drying in residential kitchens
- Commercial restaurant dish return and air-dry stations
- Garage and utility room pantry overflow shelving
- Small retail stockroom back-of-house organization
- Apartment kitchen counter space expansion
- Catering prep area utensil and pan storage
Frequently Asked Questions
What is the static load capacity per tier?
Each tier is rated at 50kg static load on the cold-rolled SPCC steel frame. Distribute weight evenly across the shelf surface and avoid point-loading single heavy items near the front edge.
How long does assembly take without tools?
Boltless Z-beam locking assembles a complete three-tier unit in under 8 minutes using a single mallet. No screws, no wrench, and no loose fastener bag to lose in transit.
Can I order custom widths or tier counts?
Yes. Custom widths from 600mm to 1200mm and two- or three-tier configurations are available at MOQ 50 units. Logo printing and retail carton artwork are handled in-house under OEM/ODM terms.
What certifications or test reports are available?
Test reports covering load and coating performance are available on request. We do not state certification holdings we cannot verify; request the specific report you need with your inquiry.
What are the payment and lead time terms?
Production lead time is 15–25 days after spec confirmation and deposit. English quotations return within 4 working hours. Standard trade terms apply; confirm the exact term with your sales contact.
How is the rack packaged for container shipping?
Each unit ships in an ISTA-3A honeycomb export carton. Cartons are sized for palletized and floor-loaded container plans, and we optimize load plans per order to reduce freight cost per unit.
Get a Factory Quote
Send your size list and quantity — unit price, MOQ and lead time within 4 working hours.
Custom sizes & coloursFree sample development on qualified OEM projectsCE · RoHS certified
DETAIL 1 / 6
What are the key features?
- 50kg static load per tier, tested on cold-rolled SPCC steel uprights
- 60–80μm powder coat passes 48-hour neutral salt-spray check
- Boltless Z-beam assembly completes in under 8 minutes, mallet only
- Leveling feet absorb 0–15mm floor variance under over-sink placement
- Custom width 600–1200mm and 2 or 3 tiers at MOQ 50 units
- ISTA-3A honeycomb carton protects every export shipment
- Lead time 15–25 days after spec confirmation and deposit
- English quotation issued within 4 working hours
DETAIL 2 / 6
What are the full specifications?
| Material | 0.8mm Cold-Rolled SPCC Steel + Powder-Coated Finish |
|---|---|
| Static Load Capacity | 50kg Per Tier |
| Coating Thickness | 60–80μm Powder Coat, 180°C Cure |
| Salt-Spray Resistance | 48-Hour Neutral Salt-Spray Tested |
| Assembly | Boltless Z-Beam Locking, Under 8 Minutes, Mallet Only |
| Tier Configuration | 3 Tiers Standard; 2 or 3 Tiers Custom |
| Width Range | 600mm–1200mm Custom |
| Leveling | Adjustable Feet, 0–15mm Floor Variance |
| Packaging | ISTA-3A Honeycomb Export Carton |
| MOQ / Lead Time | 50 Units / 15–25 Days After Spec Confirmation & Deposit |
| MOQ | 100 |
| Lead Time | 15–25 days |
| OEM / ODM | Available — up to 50 colour & size combinations |
DETAIL 3 / 6
Which sizes and finishes can I order?
Custom sizes & colours
Built to order in our own factory — up to 50 colour and size combinations per project (OEM & ODM).
50combinations max
Send your size list
DETAIL 5 / 6
Which certifications and quality checks come with it?
- Factory-direct pricing — no trading margin
- Free sample development on qualified OEM projects
- Reply within 4 working hours, in English
DETAIL 6 / 6
Can it be customised for my brand?
Every order is produced after spec and drawing confirmation. Tell us the quantity and destination country and we will send unit price, MOQ and lead time within 4 working hours.
MOQ
100
Lead time
15–25 days
Get a factory quote
Request a Quote
Hot Combos
Popular combinations
Playpens
Soft Breathable Mesh Baby Playpen with Anti-Slip Base for Indoor and Outdoor Toddler Activity
$32–$68 MOQ 50 pcs
New
Floor & Full-Length Mirrors
Rounded-Corner Metal Full-Length Mirror 5 Sizes 3 Finishes
$6.06–$17.15 MOQ 50
New
Floor & Full-Length Mirrors
3-in-1 Arch Floor Mirror Lean or Wall-Mount Easel Base
$6.95–$20.88 MOQ 50